Product Description And Specifications - Bosch 0 607 461 205 Originalbetriebsanleitung

OBJ_DOKU-32899-004.fm Page 14 Friday, August 19, 2016 3:25 PM
14 | English
Symbol Meaning
dB Decibel
QC Quick-change chuck
Symbol for hexagon socket

Symbol for external drive
UNF US fine thread
(Unified National Fine
Thread Series)
G Whitworth thread
NPT National pipe thread
W Watt
Right rotation
Left rotation
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it open.
Intended Use
The pneumatic tool is intended for driving in and loosening
screws as well as for tightening and loosening nuts within the
given dimension and power range.
Product Features
The numbering of the product features refers to the illustra-
tions on the graphics page. The illustrations are partly sche-
matic and may differ from your pneumatic tool.
1 Tool holder
2 Sleeve of the quick-change chuck
3 Housing sleeve
4 Clamping area (collar)(e. g. for an auxiliary handle)
5 Rotational direction switch
6 Utility clip
7 Hose fitting
8 Auxiliary handle*
9 Exhaust-air hose
10 Hose clamp
11 Supply-air hose
12 Round nut
13 Locking hook
14 Clutch
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 609 92A 37L | (19.8.16)
Noise/Vibration Information
Measured sound values determined according to
Unit of relative
EN ISO 15744.
loudness
Typically the A-weighted noise levels of the pneumatic tool
are: Sound pressure level 80 dB(A); sound power level
91 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Tool holder
Vibration total values a
determined according to EN 28927.
Screwdriving without impact: a
The vibration emission level given in this information sheet
Connecting thread
has been measured in accordance with a standardised test
given in EN ISO 11148 and may be used to compare one
Power output
pneumatic tool with another. It may be used for a preliminary
assessment of exposure.
Rotational direction
The declared vibration emission level represents the main ap-
plications of the pneumatic tool. However if the pneumatic
tool is used for different applications, with different accesso-
ries or insertion tools or is poorly maintained, the vibration
emission may differ. This may significantly increase the expo-
sure level over the total working period.
An exact estimation of the level of exposure to vibration
should also take into account the times when the pneumatic
tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintaining the pneu-
matic tool and the accessories, keeping the hands warm, or-
ganisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical data" complies with all applicable
provisions of the directive 2006/42/EC including its amend-
ments and is in conformity with the following standards:
EN ISO 11148-6.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
(triax vector sum) and uncertainty K
h
2 2
< 2.5 m/s , K=1.5 m/s .
h
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools