Product Description And Specifications; Product Features; Technical Data - Bosch GSR 6-60 TE Professional Originalbetriebsanleitung

Safety Warnings for Screwdrivers
Hold the power tool by insulated gripping surfaces,
u
when performing an operation where the fastener
may contact hidden wiring or its own cord. Fasteners
contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an elec-
tric shock.
Use suitable detectors to determine if utility lines are
u
hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
Hold the power tool securely. When tightening and
u
loosening screws be prepared for temporarily high torque
reactions.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.

Technical Data

Screwdrivers
Article number
Rated power input
Max. power output
No-load speed
Rated speed
Tool holder
Max. screw diameter
Weight according to
EPTA-Procedure 01:2014
Protection class
Screwdrivers
Article number
Rated power input
Max. power output
Bosch Power Tools
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for screwing in and loosening
screws.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Screwdriver bit
(2) Stop sleeve
(3) Adjusting sleeve for screw depth stop
(4) Screw depth stop
(5) Belt clip
(6) Lock-on button for on/off switch
(7) On/off switch
(8) Rotational direction switch
(9) Handle (insulated gripping surface)
(10) Universal bit holder
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GSR 6-25 TE
3 601 D45 0..
W 701
W 327
rpm 0–2 500
rpm 0–1 700
¼" internal hexagon
mm 6
kg 1.5
/ II
GSR 6-45 TE
3 601 D45 1D4
3 601 D45 1G4
W 701
W 327
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
a)
a)
GSR 6-25 TE
3 601 D45 0D4 3 601 D45 1..
3 601 D45 0G4
701
327
0–3 000
0–1 700
¼" internal hexagon ¼" internal hexagon
6
1.5
/ II
GSR 6-60 TE
3 601 D45 2.. 3 601 D45 2D4
3 601 D45 2G4
701
327
1 609 92A 7YL | (13.06.2022)
English | 11
GSR 6-45 TE
701
327
0–4 500
0–3 000
6
1.4
/ II
GSR 6-60 TE
701
327