Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Switch the power tool off immediately if the applica-
u
tion tool becomes blocked. Be prepared for high
torque reactions which cause kickback. The applica-
tion tool becomes blocked when it becomes jammed in
the workpiece or when the power tool becomes over-
loaded.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Technical Data
Cordless Drill/Driver
Article number
Rated voltage
No-load speed
A)
– First gear
– Second gear
Max. torque, hard/soft screwdriving application
according to ISO 5393
A)
Max. torque
A)
Impact rate at no-load speed
A)
Max. drilling diameter (1st/2nd gear)
– Masonry
– Steel
– Wood
Chuck capacity
Max. screw diameter
Weight according to
EPTA-Procedure 01:2014
B)
Recommended ambient temperature during
charging
Bosch Power Tools
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The
cordless combi drill UniversalImpact 18V-60 is also de-
signed for impact drilling in brick.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Operating mode presetting ring
(UniversalImpact 18V-60)
(5)
Gear selector switch
(6)
Battery release button
(7)
Rechargeable battery
(8)
Worklight
(9)
Battery charge indicator
(10) Rotational direction switch
(11) On/off switch
(12) Handle (insulated gripping surface)
(13) Universal bit holder
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
UniversalDrill 18V-60
3 603 JD7 0..
V=
min
-1
0–500
min
-1
0–1 900
Nm
47/24
Nm
min
-1
mm
mm
mm
mm
mm
kg
1.3 (1.5 Ah)–1.6 (6.0 Ah)
°C
0 to +35
English | 15
a)
a)
a)
UniversalImpact 18V-60
3 603 JD7 1..
18
0–500
0–1 900
42/24
60
–
0–28 500
–
13
35
13
10
1.3 (1.5 Ah)–1.6 (6.0 Ah)
0 to +35
1 609 92A 7WM | (03.06.2022)
18
60
13
13
35
13
10
Werbung
Inhaltsverzeichnis
