Product Description And Specifications; Product Features; Technical Data - Bosch EXACT ION 18 V-LI 2-700 Originalbetriebsanleitung

carrying the power tool with your finger on the on/off
switch or inserting the battery while the power tool is
switched on.
Do not use application tools that are worn or in other-
u
wise less than perfect condition. Defective application
tools can break, for example, causing material damage
and personal injury.
When fitting an application tool, make sure that it is
u
held securely in the tool holder. If the application tool is
not held securely in the tool holder, it may become loose
and consequently uncontrollable.
Be careful when screwing in long screws – there is a
u
risk of slipping when using particular screws and ap-
plication tools. Long screws are often difficult to control
and there is a danger that you will slip and hurt yourself
when screwing them in.
Check which rotational direction is set before switch-
u
ing on the power tool. If you want to loosen a screw but
the rotational direction is set to tighten the screw, for ex-
ample, the power tool may move violently and uncontrol-
lably.
Do not use the power tool as a drill. Power tools with a
u
shut-off clutch are not suitable for drilling. The clutch can
shut off automatically and without warning.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Technical data

Industrial cordless screwdriver
EXACT ION
Article number 3 602 D94
Rated voltage V=
Torque, hard/ Nm
soft screwdriv-
ing application
according to
A)
ISO 5393
-1
No-load speed min
A)
n
0
Weight accord- kg
ing to EPTA-Pro-
cedure
B)
01:2014
Protection rat-
ing
Bosch Power Tools
Intended Use
The power tool is intended for tightening and loosening
screws, bolts, nuts and other threaded connectors in the
specified power and dimension ranges.
The power tool is suitable only for use in industrial environ-
ments.
The power tool is not suitable for use as a drill.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
2-700 4-2000
3 602 D94 3 602 D94
400 401
18 18
0.5–2 1.5–4
70–700 200–2000 150–1500
1.3–2.4 1.3–2.4
IP 20 IP 20
(1) Tool holder
(2) Quick-change chuck
(3) Worklight
(4) Slider for preselecting the torque
(5) On/off switch
(6) Rotational direction switch
(7) Battery charge indicator
(8) LED indicator for screwdriving applications
a)
(9) Battery
a)
(10) Battery release button
a)
(11) Hanging hook
(12) Attachment slots for hanging hook
(13) Application tool
(14) Adjustment tool
(15) Setting disc
(16) Marking ring
(17) Handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
6-1500 8-1100
3 602 D94 3 602 D94
402 403
18 18
1.5–6 2–8
110–1100
1.3–2.4 1.3–2.4
IP 20 IP 20
English | 15
12-450 12-700
3 602 D94
405 404
18 18
2–12 2–12
45–450 70–700
1.3–2.4 1.3–2.4
IP 20 IP 20
1 609 92A 6N1 | (10.01.2022)