Starting The Sauna; Switching Off The Sauna; Switching On The Additional Output - Sentiotec just sauna fin Montage- Und Gebrauchsanweisung

Instructions for use for the user

10.4. Starting the sauna

1. Press the temperature symbol
► The sauna heater switches on.
2. Use the touch wheel
► The LED wheel
► In two-sensor mode, the LED wheel
ture. In single-sensor mode, it continues showing the preset temperature.

10.5. Switching off the sauna

● Press the temperature symbol
wheel .
c
► The sauna heater switches off.
► The temperature LED wheel

10.6. Switching on the additional output

Infrared lamps, or infrared heat plates, for example, can be connected to the
additional output on the sauna control unit.
WARNING!
Risk of fi re
Flammable objects that are placed on or in front of the infrared lamp
could ignite and cause fi res.
● NEVER place fl ammable objects on or in front of the infrared lamp.
● Make sure that NO fl ammable objects have been placed on or in front
of the infrared lamp before you switch it on.
WORLD OF WELLNESS
in the middle of the touch wheel
a
to set the preferred temperature.
b
shows the preset temperature for a few seconds.
c
in the middle of the temperature touch
a
goes out.
c
then shows the actual tempera-
c
p. 35/44
.
b
EN