Operation; Switching On The Light; Switching On The Sauna Control Unit; Starting The Sauna - Quick-Start - Sentiotec K2 NEXT Montage- Und Gebrauchsanweisung

Instructions for use for the user

9. Operation

Refer to Fig. 4 on page 16.

9.1. Switching on the light

The light in the sauna cabin can be switched on and off regardless of which
position the ON/OFF switch 4 is in.
To switch the light on or off, press the light switch 3.

9.2. Switching on the sauna control unit

Press the ON/OFF switch 4 to switch on the sauna control unit.
► The control light 1 lights up briefly.
► A beep can be heard.
► 00.00 flashes on the display 6.
► The sauna control unit is operational.
WARNING!
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before the sauna control unit is switched on.
9.3. Starting the sauna – Quick-start
1. Use the temperature selector 2 to set the preferred sauna temperature.
The further it is turned to the right, the higher the sauna cabin temperature.
2. Briefly press the time key 5.
► The sauna heater is switched on and begins to heat up.
► The control light 1 lights up.
WORLD OF WELLNESS
p. 17/26
EN