Switching On The Sauna Control Unit; Starting The Sauna - Sentiotec Pro B2 Gebrauchsanweisung

Instructions for use for the user

9.3. Switching on the sauna control unit

WARNING!
Risk of i re
Flammable objects that are placed on the sauna heater could ignite and
cause i res.
● NEVER place l ammable objects on the sauna heater.
● Make sure that NO l ammable objects have been placed on the sauna
heater before the sauna control unit is switched on.
● Press the ON/OFF switch
► In the temperature display
current temperature in the sauna room is displayed. In single-sensor
mode, the previously set preset temperature is displayed.

9.4. Starting the sauna

1. Use the temperature selector
► The temperature selector
in the temperature display
2. Press the temperature selector
► The sauna heater is switched on and begins to heat up.
► Then the current temperature in the sauna room is displayed in the
temperature display
is displayed.
WORLD OF WELLNESS
5
, to switch on the sauna control unit.
3
, "0" appears for a few seconds. Then the
2
to set the preferred temperature.
l ashes and the preset temperature is shown
2
3
.
2
.
3
. In single-sensor mode, the preset temperature
p. 25/30
EN