Engine; Oil Drainage High Pressure Pump; Oil Filling High Pressure Pump; Carry Away Used Oil - Dibo PTL-S Bedienungsanleitung

6.3.7. Engine

Engine oil: check the oil level with the level stick (to see guide engine).
Oil change: drain the oil while the engine is still warm to assure rapid and complete draining.
Remove the oil filler cap and drain plug to drain the oil. Install the drain plug, and tighten it securely.
Refill with the recommended oil and check the oil level. Install the oil filler cap. Oil capacity engine: 0.6 ltr.
Level cap with stroke Oil filler cap and drain plug
Check the oil level of the reduction gear (if available).
Air filter: check or there sits no clogging for the air opening.
Fuel filter: check on clogging and possibly clean or replaced.

6.3.8. Oil drainage high pressure pump

Put a oil trough under the drain plug. Remove the drain plug.
Let all the oil in the oil trough. Assemble the drain plug (with a new packing ring).
6.3.9. Oil filling high pressure pump
Remove the oil-level gauge. Fill the crankcase with oil until the oil-level comes up to the middle of the gauge
(type oil see technical data). Check the oil-level on the basis of the marks on the oil-level gauge.
Place back the oil- level gauge.

6.3.10. Carry away used oil

Pour the tapped oil in a can. Deliver the tapped oil by your dealership or at the proper authorities.
DiBO n.v. 57