Pressure Drop; Fault Conditions; Country-Specific Approvals And Certifications; Details On Energy Consumption - STIEBEL ELTRON DCE 11/13 Bedienung Und Installation

INSTALLATION
Specification
Ideal temperature of approx. 38 °C for hand-washing etc.
Amount of mixed water
Appliance
Cold water inlet temperature
Values in the table are relative to a rated voltage of 400 V. The
mixed water volume and outlet volume are subject to the available
supply pressure and the available mains voltage.

16.4 Pressure drop

Taps
Pressure drop at flow rate 10 l/min
Mono lever mixer tap, ap- MPa
prox.
Thermostatic valve, approx. MPa
Hand shower, approx. MPa
Sizing the pipework
When calculating the size of the pipework, a pressure drop for the
appliance of 0.1 MPa should be taken into account.

16.5 Fault conditions

In the event of a fault, loads up to a maximum of 80 °C at a pres-
sure of 1.0 MPa can occur temporarily in the installation.

16.6 Country-specific approvals and certifications

Test symbols can be seen on the type plate.

16.7 Details on energy consumption

The product data complies with EU regulations relating to the
Directive on the ecological design of energy related products (ErP).
Manufacturer
Load profile
Energy efficiency class
Annual power consumption
Energy conversion efficiency
Default temperature setting
Sound power level
Special information on measuring efficiency
32 |DCE 11/13| DCE 11/13 RC| DCE 11/13 H
kW 11 13.5
6 °C l/min 5.0 6.1
10 °C l/min 5.7 6.9
14 °C l/min 6.6 8.1
0.04 - 0.08
0.03 - 0.05
0.03 - 0.15
kWh
dB(A)
DCE 11/13
230770
STIEBEL ELTRON
XS
A
465
% 40
°C 60
15
Data at Pmax.
DCE 11/13 RC DCE 11/13 H
230771
STIEBEL ELTRON STIEBEL ELTRON
XS
A
465
40
60
15
Data at Pmax. Data at Pmax.
www.stiebel-eltron.com
232792
XS
A
465
40
60
15