Herunterladen Inhalt Inhalt Diese Seite drucken

Application Areas / Conversion Table; Pressure Drop; Fault Conditions; Energy Consumption Data - STIEBEL ELTRON DCE 11/13 Bedienung Und Installation

Elektronisch geregelter kompakt durchlauferhitzer
Vorschau ausblenden Andere Handbücher für DCE 11/13:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
INsTALLATIoN
Specification

16.3 Application areas / conversion table

Specific electrical resistance and specific electrical conductivity
(see chapter "Installation / Specification / Data table").
Standard specification
at 15 °C
20 °C
Spec. Re-
Spec. Conduc-
Spec. Re-
tivity σ ≤
sistivity
sistivity
ρ ≥
ρ ≥
Ωcm
mS/m μS/cm Ωcm
900
111
1111
800
1100
91
909
970
Outlet temperature approx. 60 °C for the kitchen sink and when
using a thermostatic valve
outlet volume
appliance
Cold water inlet temperature
6 °C
10 °C
14 °C
Ideal temperature of approx. 38 °C for hand-washing etc.
Mixed water amount
appliance
Cold water inlet temperature
6 °C
10 °C
14 °C
The values in the table are relative to a rated voltage of 400 V The
mixed water volume and outlet volume are subject to the available
supply pressure and the available mains voltage.

16.6 Energy consumption data

Product datasheet: Conventional water heaters to regulation (EU) no. 812/2013 and 814/2013
Manufacturer
Load profile
Energy efficiency class
Energy conversion efficiency
Annual power consumption
Default temperature setting
Sound power level
Special information on measuring efficiency
Daily power consumption
www.stiebel-eltron.com
25 °C
Spec. Conduc-
Spec. Re-
Spec. Conduc-
tivity σ ≤
tivity σ ≤
sistivity
ρ ≥
mS/m μS/cm Ωcm
mS/m μS/cm
125
1250
735
136
1361
103
1031
895
112
1117
kW
11
13.5
l/min
2.9
3.6
l/min
3.2
3.9
l/min
3.4
4.2
kW
11
13.5
l/min
5.0
6.1
l/min
5.7
6.9
l/min
6.6
8.1
%
kWh
°C
dB(A)
kWh

16.4 Pressure drop

Taps/valves
Pressure drop at flow rate 10 l/min
Mono lever mixer tap, ap-
prox.
Thermostatic valve, approx.
Hand shower, approx.
Sizing the pipework
When calculating the size of the pipework, a pressure drop for the
appliance of 0.1 MPa should be taken into account.

16.5 Fault conditions

In the event of a fault, loads up to a maximum of 80 °C at a pres-
sure of 1.0 MPa can occur temporarily in the installation.
DCE 11/13
DCE 11/13 compact RC
230770
STIEBEL ELTRON
STIEBEL ELTRON
XS
A
40
465
60
15
Data at Pmax.
2.124
DCE 11/13| DCE 11/13 RC| DCE 11/13 H |
MPa
MPa
MPa
DCE 11/13 H
230771
STIEBEL ELTRON
XS
A
40
465
60
15
Data at Pmax.
Data at Pmax.
2.124
0.04 - 0.08
0.03 - 0.05
0.03 - 0.15
232792
XS
A
40
465
60
15
2.124
33

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dce 11/13 hDce 11/13 rc

Inhaltsverzeichnis