Abicor Binzel CR1000 Betriebsanleitung Seite 36

5 Functional description
10
9
8
7
1 CR1000/CR1250 400
VAC cooling unit
2 Coolant filler neck
3 Fuses
Abb. 6 Components of the CR1000/CR1250 400 VAC cooling uni
NOTICE
• To permanently monitor the correct functioning of the entire cooling system we recommend that you connect the active
flow control connector (9), (10) to the power source.
 Fig. 7 Overview of the coolant circuit on page EN-11
• If the flow rate is too low, the flow control instigates the immediate switch-off of the connected devices and prevents
thermal overload.
EN - 10
1 2
4 On/off switch
5
Coolant container with fill level
indicator
6 400V plug
3
7 Coolant outlet neck 10 Flow control connector
8
Coolant return (red)
9 Coolant supply (blue)
BAL.0351.0 • 2018-08-15
CR1000/CR1250
4
5
6