Wireless Setup [Wis]; Wireless Pairing [Wsp] - Canton Smart Soundbox 3 Bedienungsanleitung

English
Press the key Play/Pause button " ". The display shows [NO].
6
Note: To cancel the reset procedure press the input select key "
the menu.
To execute the reset press the "+" key. [YES] appears briefly in the display and then [OK] for approx. 3 seconds to confirm the reset process.
7
After this the speaker enters normal opperation mode.
8

4.Wireless Setup [WIS]

The fourth item of the Main Menu is the Wireless Setup which is used to set-up both the wireless speaker connection and the Bluetooth
wireless technology. It contains the items:
•  W ireless Pairing [WSP]
• Wireless Reset [WRE]
• Bluetooth Setup [BT]
– Pairing Mode [BTP]
– BT Select [BTS]
– AutoPlay [APL]
– BT Reset [BRE]

Wireless Pairing [WSP]

This menu item allows you to connect other wireless speakers of the Canton Smart Series to your Soundbox 3. In this step, one of the spea-
kers will be designated as the "Master". You are able to connect a second speaker for the left and right channel (depends on the position
of the first Soundbox 3) and a wireless Subwoofer.
For this proceed as follows:
To enter the Menu, press and hold the input select key "
1
Use the "+" or "-" button to navigate into the menu Wireless Setup [WIS] and confirm with the Play/Pause button " ".
2
Select the function Wireless Pairing [WSP]and confirm with the Play/Pause button " ".
3
The menu item Wireless Pairing [WSP] is entered and the display shows [MFL] (MFL = Master Front Left)
4
74
". The display shows [NWR] again. Press this key additional two times to exit
" for at least 3 seconds.
®