Sound Settings [Snd]; System Setup [Sys] - Canton Smart Soundbox 3 Bedienungsanleitung

Change the EQ using the "+/–" keys.
5
• EQ1 for free installation (factory setting)
• EQ2 for installation on a rear or side panel
• EQ3 for installation in a corner of a room
If using wirelessly connectet speakers (e.g. a wireless subwoofer), there are aditional options (speakers) which can be selected and
6
changed.

Sound settings [SND]

This menu allows you to change the settings for bass, midrange and treble.
The level can be set in 1dB steps from -6dB to +6dB, where 0dB is the factory setting.
To change the sound settings do the following:
To enter the menu, press and hold the input select key "
1
Use the "+" or "-" button to navigate into the menu Speaker Setup [SPS] and confirm with the Play/Pause button " ".
2
Select the item Sound adjustment [SND] to change the sound settings, and confirm with the Play/Pause button " "
3
Select the desired frequency range [BAS], [MID] or [TRE].
4
Change the level via the "+" and "-" keys.
5
Press the input select key "
6
Repeat steps 2-4 if you want to change the level of another frequency range.
7

2. System Setup [SYS]

The second item in the main menu is the System Setup. It contains the following menu items:
• Sleep Timer [SLP]
• IR Menu [IRM]
– Infrared Learn [IRL]
– Direct Input Learn [DIL]
– Infrared Clear [CLR]
• Standby Mode [STB]
" for at least 3 seconds.
" to go back one level.
English
3 6 7