Canton Smart Soundbox 3 Bedienungsanleitung Seite 87

Problem Possible cause
The subwoofer does 1. The subwoofer is not paired yet.
not reproduce sound.
No connection can be 1. The DHCP server is deactivated in the router.
established between
the router and the
2. A filter for MAC addresses was created in the
soundbox.
router.
3. Your router is not compatible with Chromecast
built-in.
Your WLAN network 1. The network connection for the Soundbox is
is not displayed during set to Ethernet [ETH].
setup.
The soundbox is not 2. Device and Soundbox must be conncted to
indicated in the app on the same network.
your (mobile) device.
Solution
1. Pair the slave speaker with the soundbox according
to chapter "Wireless Speaker Pairing" [WSP].
1. Activate the DHCP server of the router according to the
router's instructions.
2. Deactivate the MAC Address Filter.
3. Routers that are demonstrably compatible can be found in
the web link in the chapter "Using Chromecast built-in for
audio". However, there are more compatible routers.
1. Change the setting to WiFi [WIF].
2. Connect device respectively Soundbox to the correspon-
ding network (e.g. when using a guest network)
English
3 8 7