Canton Smart Soundbox 3 Bedienungsanleitung Seite 82

English
Problem
The Soundbox 3 does
not turn on automati-
cally.
The Soundbox 3
switches off
automatically.
The Soundbox 3
does not turn off
automatically.
82
Possible cause
1. The standby function is factory set to [NSB].
The system must be turned on manually.
2. The device has been switched off via the
Power " " button or the "Power" button
of the TV remote control (when using the IR
learning function).
3. The signal at [AUX] (Line) input is too low.
1. The standby function [ECO], [AUT], or
[NSB] / [LSB] is activated.
2. The infrared command for Standby has been
learned incorrectly.
1. The standby function [MAN] is activated.
Solution
1. Switch the standby function to [AUT].
2.1. Switch on the Soundbox 3 via the Power "
button and wait until it automatically switches to the
standby mode, next time.
2.2. Delete the "Power" button of your TV remote from the
Soundbox 3 to prevent it from switching off together
with your TV.
3. Increase the output level on your source device.
1. Select the standby function to [MAN].
2. Learn the infrared command for Standby again.
1. Activate the standby function [ECO], [AUT], or
[NSB] / [LSB].
"