Canton Smart Soundbox 3 Bedienungsanleitung Seite 75

Now, you can choose if this Soundbox 3 should be placed on the left or the right side. If this Soundbox 3 should be placed on the left side,
5
choose [MFL]. To place it on the right side select [MFR] using the "+" or "-" key. (MFR = Master Front Right). Regardless of the position,
this Soundbox 3 is defined as "Master" speaker.
To pair slave speakers, press the Play/Pause button " ".
6
Use the "+ " or "-" button to select the speaker you want to pair. The following channels are available: [FL]=front left;
7
[FR]= front right; [SUB] = Subwoofer.
Note: If you have chosen [MFL] for the Master speaker, you should choose [FR] for the slave speaker.
Note: Before starting the pairing process, the speaker to be paired (slave speaker) must have been disconnected from the mains for at least 30 seconds.
Now press the Play/Pause button " " button. The display should show [PIR].
8
Connect the (slave) speaker you want to pair to the mains. Turn it on when it is in standby mode.
9
Note: The maximum time between pressing the Play/Pause button " " button and switching on the slave speaker is 30 seconds.
Approx 10 – 20 seconds after switching on the slave speaker the displays should show "connected" [CON].
10
If [FAI] appears in the display, repeat steps 6 to 8 and make sure that...
11
a.) the desired slave speaker was disconnected from the mains for at least 30 seconds.
b.) no more than 30 seconds have passed between pressing the Play/Pause button " " button and switching on the slave speaker.
c.) the distance between the two speakers do not exceed 10 m and they are in the same room.
Caution: If you have completed the above steps successfully, please do not repeat them with the soundbox 3 switched of. This will automatically
designate a new Master speaker and would prevent the previous slave speakers from connecting to the previously designated master speaker.
English
3 7 5