English; Getting Started - Cochlear Baha Cordelle II Bedienungsanleitung

English

We strive to provide the best possible products and services to our clients. Your
views and experiences of our products and services are important to us. If you
have any comments you would like to share, please contact us:
Address:
Customer Service - Cochlear Americas
13059 E. Peakview Avenue, Centennial, CO 80111, USA
Toll free (North America) 1800 523 5798
Tel: +1 303 790 9010 Fax: +1 303 792 9025
Email: customer@cochlear.com
Customer Service - Cochlear Europe
6 Dashwood Lang Road, Bourne Business Park, Addlestone, Surrey KT15 2HJ, UK
Tel: +44 1932 87 1500 Fax: +44 1932 87 1526
Email: info@cochlear.co.uk
Customer Service - Cochlear Asia Pacific
1 University Avenue, Macquarie University, NSW 2109, Australia
Toll free (Australia) 1800 620 929
Toll free (New Zealand) 0800 444 819
Tel: +61 2 9428 6555 Fax: +61 2 9428 6352 or Toll free 1800 005 215
Email: customerservice@cochlear.com.au
6

Getting started

Connecting and disconnecting the unit
A plastic snap connector is mounted to the head worn unit. It is designed to snap
onto the abutment and hold the head worn unit securely in place. The body worn
unit is equipped with a clip so you can attach the unit to your clothes. The audio
cord is connected by attaching the angulated plug to the body worn unit and the
straight plug to the head worn unit (see pictures on the inside of the cover). The
three-pin plug is reversible.
Connecting 1 Hold the head worn unit so that the plastic snap connector is
accessible and move any hair away from the abutment. Push the device carefully
in with a tilting motion and it will attach to the abutment.
Disconnecting 2 Tilting the head worn unit slightly in any direction will release
it from the abutment.
Warning! Do not push the head worn unit straight in and do not pull
it straight out. This puts pressure on the abutment and may cause
discomfort.
English
1
2
7