GB
English, Installer manual - MODBUS 40
General
With MODBUS 40 a NIBE heat pump/indoor module
can be controlled and monitored by external Mod-
bus-equipped equipment.
Contents
1 x
Unit box
1 x
Wall bracket
Caution
The heat pump's/indoor module's software
must be the latest recommended version or
have a version number greater than 3000. If
not, download the latest recommended soft-
ware version for your product to a USB
memory from http://www.nibeuplink.com
and install it.
TIP
To administer Modbus via a PC download and
install ModbusManager from
www.nibe.se/kommunikation.
10
Mounting
MODBUS 40 can be positioned lying on a flat surface
or wall-mounted. Where MODBUS 40 is wall-mounted,
use the supplied wall bracket.
NOTE
When wall mounting, the holes for the cables
must be pointing downwards to prevent water
from entering MODBUS 40.