Daily Use; Switching On Or Off; Front Panel Controls - Hitachi CP2896TA Wartungshandbuch

20

Daily use

Switching on or off

To switch on
Press the mains switch on the front of the TV set. To switch on from the
stand-by mode, hold the TV button down until the TV switches on or
enter a number to select a programme directly.
To put on stand-by
Press the stand-by button to switch off the TV set to the stand-by mode.
The TV set will switch to the stand-by mode automatically if no
transmission is received for five minutes. For further information, see
the section "Switching the TV set to stand-by with a timer".
To switch off
Press the mains switch on the front panel to turn the TV set off.
If the TV set is not be used for a longer period of time, eg. overnight or
during the day, switch it off by pressing the mains switch. If the TV set
will not be used for an extended period of time, disconnect the mains
plug and the aerial cable from the wall socket.
Selecting a TV programme
There are four alternative ways of selecting a TV programme.
A
By entering a programme number
Enter a programme number with the number buttons.
_________________________________________________________________________
B
By stepping up and down
While you are watching a TV programme, select another programme by
pressing the cursor button up or down.
_________________________________________________________________________
C
By scrolling the programme list
When you keep the cursor button (up or down) depressed, a programme
list will appear on the screen. Let the list scroll until the programme you
want is selected.
_________________________________________________________________________
D
By choosing a programme from the Information menu
Select the Information menu by pressing the i button (under the lid) and
follow instructions given in the menu. To view the selected TV
programme, press the TV button.

Front panel controls

The local control unit is situated behind a flap on the lower
edge of the TV. The flap is opened by first pressing its top edge
inwards and then by tilting it down.
Local control push buttons and indicator lights are as follows:
1. Indicates power is switched on
2. Mains switch, to turn the TV set on or off
3. Lights up when remote control is being used or
copy function is activated
4. Indicates TV is iswitched on
5. Volume controls
6. Programme selection
The shape of the front panel may vary according to the model.
However, the functions remain the same. For information on
front panel connectors, see the section "External devices".
To switch off
to stand-by
1
4
7
To switch on
from stand-by
1 3 4 5 6
2
R AUDIO L VIDEO S-VIDEO
2 3
5 6
8 9
0
TV
i
P
3P58 83041010-GB