Residual Risks; Safety Directions For The Battery Charger; Correct Handling Of The Battery Charger - FLORABEST FGS 3.6 A1 Originalbetriebsanleitung

GB
be switched off immedia-
tely. Injuries must be pro-
perly treated or medical
assistance sought. Read the
„Trouble shooting" section to
correct any malfunctions or con-
tact our Service Centre.
i) Operation of the machine
in bad weather is to be
avoided, especially if the-
re is a risk of lightning.
There is a risk of personal injury
from an electric shock.

4) RESIDUAL RISKS

Even if properly operating and hand-
ling this electric tool, some residual
risks will remain. Due to its const-
ruction and build, this electric tool
may present the following hazards:
a) Cuts
b) Ear damage if working without
ear protection.
c) Eye damage if suitable eye pro-
tection is not worn.
d) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
Warning! During operation,
this electric tool generates an
electromagnetic field which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. To reduce the risk of
serious or lethal injuries, we
recommend that persons with
medical implants consult their
doctor and the manufacturer
12
of their medical implant befo-
re operating the machine.
Safety Directions for the
battery charger
1) CORRECT HANDLING OF
THE BATTERY CHARGER
a) The charger must only be
connected to a mains socket via
a residual-current circuit breaker
(RCD) with a rated leakage cur-
rent of not more than 30 mA.
Fuse: at least 13 ampere.
b) To charge the battery, use
only the charger supplied.
Risk of fire and explosion.
This ensures that the safety of
the device is maintained.
c) Before each use, check the
charger, cable and plug
and have them repaired by
qualified professionals and
only with original parts. Do
not use a defective charger
and do not open it up your-
self. This ensures that the safety
of the device is maintained.
d) Ensure that the mains vol-
tage matches the specifi-
cations on the charger ra-
ting plate. Risk of electric
shock.
e) Disconnect the charger
from the mains before clo-
sing or opening connecti-
on to the battery / power
tool / device. This ensures
that the battery and charger are
not damaged.
f) Keep the charger clean
and away from wet and
rain. Do not use the char-