Prefader Listening To The Channels; Fast Forward And Reverse; Return To The Starting Point Of The Title Or To A Defined Spot (Cueing) - Omnitronic TMC-1 MK2 Bedienungsanleitung

8.6 Prefader listening to the channels

When the computer's sound card has been configured for prefader listening ( chapter 7) you can monitor
each of the decks via headphones even if the corresponding channel is faded out. Thus, it is possible, e. g.
to play the beginning of a title, to set a cue point, or to adjust a continuous loop without the audience
listening in.
1
Use the buttons [PFL] to the select the channel to be monitored.
2
Use the mouse to adjust the desired headphone volume with the control [CUE].

8.7 Fast forward and reverse

1
For fast forward and reverse first activate the search function for the [JOGDIAL] by shortly pressing the
button [SEARCH] (orange LED lights up). Then turn the [JOGDIAL] in the corresponding direction.
2
In order to quickly jump to a certain spot in the title, click with the mouse on the corresponding position
in the signal diagram or in the position ring around the turntable platter.

8.8 Return to the starting point of the title or to a defined spot (cueing)

To quickly jump to a defined spot, three starting points (cue points) can be stored permanently for the
buttons [HOT CUE 1] to [3]. The cue points well be kept even after closing the program and can be
overwritten and deleted at any time. With the button [CUE] you can return to the beginning of the title or a
cue point defined before, and momentarily play the title.
Button [CUE]
1
To jump to the starting point of a title, press the button [CUE] in pause or play mode. Now the unit is in
pause mode at the starting point of the title (LED of the button CUE lights up red).
2
After jumping to the cue point, playback can be started with the button ► [PLAY]. Alternatively, you can
keep the button [CUE] pressed and momentarily play the title. As soon as you release the button the
unit instantly returns to the cue point and is in pause mode.
3
If cue points have been stored with the buttons [HOT CUE 1] to [3], pressing the button [CUE] will not
return you to the starting point of a title but to the cue point stored last.
Buttons [HOT CUE 1] to [3]
1
To set a cue point while playing a title, either press one of the buttons [HOT CUE 1] to [3] when the
desired spot is reached (fly cue) or set the unit to pause at the desired spot with the button II [PAUSE]
precisely select the desired spot with the [JOGDIAL], and then press one of the buttons [HOT CUE 1]
to [3].

Virtual DJ adds a marker in the waveform display for each cue point.
2
It is now possible to jump to the corresponding cue points with the buttons [HOT CUE 1] to [3]. The title
is played from the cue point.
3
Pressing the buttons [HOT CUE 1] to [3] several times will restart the title from the cue point, creating a
stutter effect.
4
To overwrite a cue point stored on the buttons [HOT CUE 1] to [3], set a new cue point with the button
[CUE].
5
To delete a cue point, right-click the marker in the waveform display with the mouse and select [Delete].
With the option [Rename], you can specify your own name for a cue point.
6
Pressing the button II [PAUSE] subsequently cycles through the beginning of the title and all cue points.
56/66 00061966.DOC, Version 1.1