Tone Controls; Power Indicator - Omnitronic TMC-1 MK2 Bedienungsanleitung

9 Button PITCH
For selecting the pitch adjustment range. Each push of
the button switches between ±100 %, ±6 %, ±12 % and
±25 %.
10 Pitch slide control
Sets the speed (if the button [MASTER TEMPO] lights
up, the tonal pitch will not be changed). Slide the control
up to decrease the pitch, slide it down to increase it. The
pitch percentage is indicated in the display.
11 Buttons HOT CUE 1-3
To store and to call up to three cue points per title.
15
Control GAIN
Adjusts the input amplification.
16 LED level meter L/R
6-digit LED meter of the stereo master signal within the
range of -13 dB to +3 dB.
17

Power indicator

13
Button BPM
Sets the number of beats per minute (BPM) of a title
manually. For this press the button several times to the
beat of the music.
12 Buttons PITCH BEND + and –
The function Pitch Bend creates a temporary change of
speed. As long as the buttons are pressed, the title is
played slower or faster.
14 Button PFL
For prefader listening of the channel.
18 Crossfader
For crossfading between Deck A and Deck B. In mid-
position both decks can be heard at the same volume.
19

Tone controls

3-band equalizer (HIGH, MID, LOW).
20 Channel fader
Adjusts the channel level.
41/66 00061966.DOC, Version 1.1