Activating The Software - Omnitronic TMC-1 MK2 Bedienungsanleitung

5.4 Activating the software

1
Connect the controller to your computer and start the software ( chapter 6). Enter the serial number
supplied with the CD-ROM to activate the software.

Note
Keep both the serial number and the installation CD in a safe place, since both the serial number and

the installation CD are required if you re-install your system, or change your computer.
2
The Auto Update indication comes on: Virtual DJ will now try to connect to the internet to check if a new
version of the software is available.
3
The initialization screen is shown and the program is opened.
47/66 00061966.DOC, Version 1.1