Playing A Title - Omnitronic TMC-1 MK2 Bedienungsanleitung

8.2 BPM analysis
The first time you display titles in Virtual DJ, the beats per minute (BPM) are not calculated.
1
To analyze the BPM, right-
click with your mouse on the
relevant title. Then
[BPM -> Re-Analyze]
[Scan for BPMs] for a group
of titles.
2
You can also
complete directory by right-
clicking with your mouse on
the relevant folder in the left
browser section and selecting
[Scan for BPMs]

Notes
Always run an extensive BPM analysis in advance and not during a performance. As the BPM analysis takes

up to 1 hour for 120 music files, it is no option shortly before a performance. Rather analyze your complete hard
drive in advance. You do not need to sit in front of your computer while Virtual DJ is analyzing the files.
Analyzing your entire library is not recommended while mixing with Virtual DJ as the BPM analysis

requires a lot of processing power and you computer will not respond as fast as it should.
Generally, a BPM analysis is accurate. However, if a file is not properly analyzed, you can correct it

manually by entering the BPM rate [right-click] > [BPM] > [Manual Edit] or by using the button [BPM].

8.3 Playing a title

1
Press the button ► [PLAY] (blue LED lights up) to start playback from starting point of the title (time
index 00:00) or click the right mouse button over the button II [PAUSE] to start the title from the first
detected bass beat.
2
Pressing the button ► [PLAY] several times in play mode, will restart the title from the current position,
creating a stutter effect.
3
Press the button II [PAUSE] to interrupt playback (green LED lights up). Pressing the button several
times will cycle through the starting point of the title and all cue points ( section 8.8).
4
The unit stops at the end of the title. However, the title remains in the deck until another title will be
loaded.
select
or
analyze a
Virtual DJ
54/66
TMC-1 MK2
00061966.DOC, Version 1.1