Omnitronic TMC-1 MK2 Bedienungsanleitung Seite 40

1 Button ► [PLAY]
To start playback and for stutter effects.
2
Button II [PAUSE]
To switch to pause and to jump to cue points.
3 Button CUE
• For return to the beginning of the title or a cue point
defined before (the unit is in pause mode).
• When keeping the button pressed in pause mode, the
title is momentarily played. As soon as you release the
button the unit instantly returns to the cue point.
4 Jogdial
• In play mode for the function pitch bend (as with the
buttons [PITCH BEND +/–]).
• If the fast search mode is activated (button [SEARCH]
lights), for fast forward and reverse within a title.
• If the scratch function is activated (button [SCRATCH]
lights), for generating scratch effects.
• The control LED [SENSOR] lights up, as soon as the
[Jogdial] is actuated.
5 Buttons SEARCH and SCRATCH
Determine the operating mode of the jogdials:
[
• button SEARCH]: switches fast forward and reverse
on and off
[
• button SCRATCH]: switches the scratch function on
and off
6 Buttons LOOP IN, OUT and ADJ
Buttons for playing a continuous loop synchronized to the
beat:
• button [IN]: Sets the starting point of a loop.
• button [OUT]: Sets the end point of a loop which is
instantly started. The loop will continue to play until the
button is pressed once again.
• buttons [LOOP ADJ]: Set the length of the loop to
exactly 1, 2, 4, 8, 18 or 32 beats.
7 Control MASTER CONTROL
Adjusts the overall volume.
8
Button MASTER TEMPO
For constant pitch when the speed has been changed
with the [pitch slide control].
40/66 00061966.DOC, Version 1.1