Announcements Via The Dj Microphone; Prefader Listening To The Channels; Fast Forward And Reverse - Omnitronic TMC-2 MK2 Bedienungsanleitung

7.6 Announcements via the DJ microphone

Announcements via the DJ microphone are directly mixed to the master signal. Use the control [MIC LEVEL]
to adjust the desired volume.

7.7 Prefader listening to the channels

The cue function allows monitoring each of the decks via headphones even if the corresponding channel is
faded out. Thus, it is possible, e. g. play the beginning of a title, to set a cue point, or to adjust a continuous
loop without the audience listening in.
1
Use the control [CUE] to select and crossfade the monitoring signal for the headphones: Turn the
control to the left to monitor Deck A, turn the control to the right to monitor Deck B. In mid-position, both
decks can be heard at the same volume.
2
Adjust the desired headphones volume with the control [CUE LEVEL].

Tip
If the headphone volume is too high although you have selected a low setting with the control [CUE

LEVEL], you can adapt the volume at the computer. Under Windows XP, go to [Sounds and Audio
Devices Properties/Audio/Sound playback]. The headphone output is indicated as [CONTROL
HEADPHONE].
Under Mac, call the [Apple Menu], select [System Preferences], click [Sound] and select the [Output]

tab.

7.8 Fast forward and reverse

1
For fast forward and reverse first activate the search function for the [JOGDIAL] by shortly pressing the
button [SEARCH] (orange LED lights up). Then turn the [JOGDIAL] in the corresponding direction.
2
In order to quickly jump to a certain spot in the title, click with the mouse on the corresponding position
in the signal diagram or in the position ring around the turntable platter.
61/72 00061967.DOC, Version 1.1