Master Control; Tone Controls; Pitch Control - Omnitronic MMC-1 Bedienungsanleitung

13

Master control

Level control for the master outputs.
14 Controls X-PARAMETER/Y-PARAMETER
To adjust the parameters for the selected effect.
15 Control EFFECTS SELECT
To select an effect indicated by the LEDs 1-8.
16 Button PITCH LOCK
Activates/deactivates the Pitch Lock. With the function
activated (LED lights), the tonal pitch of the title remains
constant when the speed of the title is changed with the

pitch control.

17 Button PITCH ON
Activates/deactivates the pitch control. With the function
activated, the LED will light up.
18 Buttons PITCH BEND +/-
To synchronize the beat of a title with the beat of a title on
the other deck.
• button PITCH BEND +/-: As long as the button "+" or "-"
is kept pressed, the title is played faster or slower.
• button PITCH BEND +/- + button SHIFT: press both
buttons in combination to jump one beat forward or
backward in the title.
19 Button SHIFT
Modifies the normal action of another control element of
the MMC-1 when the two are actuated in combination.
20

Tone controls

•
3-way equalizer (HIGH, MID, LOW) for deck 1 and 2.
•
When the controller is operated with an external mixer,
these controls can be assigned to other functions.
21
Crossfader
•
For crossfading between deck 1 and 2. In mid-position,
both decks can be heard at the same volume.
•
When the controller is operated with an external mixer,
this fader can be assigned to other functions.
22 Pitch control
This sliding control sets the replay speed of the loaded
title (with the function Pitch Lock activated, the tonal pitch
will not be changed). The adjustment of the control is
effective only with the button PITCH ON pressed.
23 Jog wheel
• In replay mode for the function Pitch Bend (as with the
buttons PITCH BEND).
• If the fast search mode is activated (button JOG SEEK
lights up), for fast forward/reverse within a title.
• If the scratch function is activated (button SCRATCH
lights up) to generate scratch effects.
• In pause mode to precisely select a certain spot.
24 Button
• button : Switches the loaded title between replay
and pause.
• button + button SHIFT: Starts the loaded title
synchronized with the beat on the other deck.
25 Button CUE
• button CUE: For return to the cue point defined before
(the unit is in pause mode).
• button CUE + button SHIFT: For return to the title
beginning (from replay mode, the title is started
instantly).
• When loading a title the starting point of the title is
stored as a new cue point (LED lights). To move the
cue point, switch to pause mode with the button
and then press the button CUE (LED lights).
• When keeping the button CUE pressed in pause mode,
the title is momentarily replayed. As soon as you
release the button the unit instantly returns to the cue
point.
26 Buttons IN/OUT/RELOOP
Buttons to program and replay a continuous loop.
Manual loop mode
• button IN: Sets the starting point of a continuous loop
(LED lights).
• button OUT: Sets the end point of a continuous loop
which is instantly started (the LEDs of the buttons IN
and OUT are flashing). The loop will continue to play
until the button OUT is pressed once again (the LEDs of
the buttons IN and OUT light and indicate that a loop is
stored an ready to be engaged).
• button RELOOP: Starts the loop once again (the LEDs
of the buttons IN and OUT are flashing again). Press
the button OUT to exit the loop.
Automatic loop mode
In automatic loop mode you can replay a short loop which
is synchronized to the beat. The loop length can be
selected with the buttons LOOP+/-.
• button IN/OUT: As long as the button is kept pressed, a
short automatic continuous loop is replayed (LED
lights).
• button IN/OUT + button SHIFT: A short automatic
continuous loop is replayed (LED flashes) until the
button IN/OUT is actuated again (LED off).
• the button RELOOP has no function
27 Buttons/Selector switches LOOP+/- with LEDs
• buttons LOOP+/-: To select the loop length and the
sample length for the automatic loop mode: 1/32, 1/16,
1/8, 1/4, 1/2, 1/1 or 2/1 beats (indicated by the LEDs
between the buttons).
• button LOOP+ + button SHIFT: activates the
automatic loop mode (LED lights)
• button LOOP- + button SHIFT: deactivates the
automatic loop mode (LED off)
28 Buttons HOT CUE 1-4
To store and to select up to four cue points per title.
• button HOT CUE 1-4: for return to the cue point
defined before.
• button HOT CUE 1-4 + button SHIFT: to set a new
cue point "on the fly", i.e. without interrupting the replay
(LED lights).
• To set a more precise cue point, use the jog wheel in
pause mode to go to the spot, press the corresponding
button HOT CUE 1-4 and then press the button CUE.
21/29 00041120.DOC, Version 1.0