Tone Controls; Power Indicator - Omnitronic TMC-2 MK2 Bedienungsanleitung

12 Buttons LOOP IN, OUT and ADJ
Buttons for playing a continuous loop synchronized to the
beat:
• button [IN]: Sets the starting point of a loop.
• button [OUT]: Sets the end point of a loop which is
instantly started. The loop will continue to play until the
button is pressed once again.
• buttons [LOOP ADJ]: Set the length of the loop to
exactly 1, 2, 4, 8, 18 or 32 beats.
13 Buttons SEARCH and SCRATCH
Determine the operating mode of the jogdials:
[
• button SEARCH]: switches fast forward and reverse
on and off
[
• button SCRATCH]: switches the scratch function on
and off
15
Control GAIN
Adjusts the input amplification.
16 LED level meter L/R
6-digit LED meter of Deck A and Deck B within the range
of -13 dB to +3 dB.
17

Power indicator

14
Jogdial
• In play mode for the function pitch bend (as with the
buttons [PITCH BEND +/–]).
• If the fast search mode is activated (button [SEARCH]
lights), for fast forward and reverse within a title.
• If the scratch function is activated (button [SCRATCH]
lights), for generating scratch effects.
• The control LED [SENSOR] lights up, as soon as the
[Jogdial] is actuated.
18 Crossfader
For crossfading between Deck A and Deck B. In mid-
position both decks can be heard at the same volume.
19

Tone controls

3-band equalizer (HIGH, MID, LOW).
20 Channel fader
Adjusts the channel level.
44/72 00061967.DOC, Version 1.1