Operating The Scale In A Wireless Group; Activating The Wireless Module (Sys); Setting Up A Wireless Group (Lrn) - Seca 757 Bedienungsanleitung Und Garantieerklärung

7.2 Operating the scale in a wireless group

......
rF
......
Activating the wireless
module (SYS)
Setting up a wireless
group (Lrn)
All the functions required to operate the device in a
seca wireless group can be found in submenu "rF".
For information on how to navigate in the menu see
page 65.
Learn Group (ID)
• On
Autosend
• Off
• On
System
• Off
• HI
• MA
Autoprint
• HI_MA
• Off
• Year
• Month
• Day
Time
• Hour
• Minute
The device is supplied with the wireless module disa-
bled. You have to activate it before you can set up a
wireless group.
1. Switch on the device.
2. Select the "SYS" menu item from the "rF" sub-
menu.
3. Confirm the selection.
4. Select the "On" setting.
5. Confirm the selection.
You exit the menu automatically.
To set up a wireless group proceed as follows.
1. Switch on the device.
2. Call up the menu.
3. Select the item "rF" in the menu.
4. Confirm the selection.
• Channel 1 (C1)
• Channel 2 (C2)
• Channel 3 (C3)
NOTE
When the wireless module is activated, the
power consumption of the device will increase.
We recommend using a power pack when
operating the device in a wireless network.
The seca 360° wireless network • 71
English
Stop Reg. Devices (MO)