Setting The Display Backlighting (Lcd); Restoring Factory Settings (Reset) - Seca 757 Bedienungsanleitung Und Garantieerklärung

Setting the display
backlighting (Lcd)
Restoring factory
settings (RESET)
68 •
You can change the duration and brightness of the
display backlighting.
1. Select the "Lcd" item from the menu.
2. Confirm the selection.
3. Select a menu item
– dUr: duration
– bri: brightness
4. Confirm your selection.
The current setting is displayed.
5. Select the setting you require:
Function
Duration
Brightness
6. Confirm your selection.
You exit the menu automatically.
7. If you also wish to make settings for the second
function, repeat this process.
You can restore the factory settings for the following
functions:
Function
Autohold (AhoLd)
Acoustic signal (PrESS)
Acoustic signal (HoLd)
Attenuation (FiL)
Wireless module (SYS)
Autosend (ASEnd)
Autoprint (APrt)
NOTE
The wireless module is switched off when fac-
tory settings are restored. Information about
existing wireless groups is retained. Wireless
groups do not have to be set up again.
1. Select the "rESEt" item from the menu.
2. Confirm the selection.
You exit the menu automatically.
Setting
• Short (approx. 15 sec.)
• Long (approx. 45 sec.)
• PErM (continuous)
• 50 %
• 100 %
• Off
Factory setting
depending on
model
Off
On
1
Off
Off
Off