The Seca 360° Wireless Network; Introduction; Seca Wireless Groups - Seca 757 Bedienungsanleitung Und Garantieerklärung

7. THE SECA 360° WIRELESS NETWORK

7.1 Introduction

seca wireless groups

0
1
3. Switch off the scale.
Factory settings are restored and are available
when the scale is next switched on.
This device is equipped with a wireless module. The
wireless module allows measured results to be trans-
mitted wirelessly for analysis and documentation. Data
can be transmitted to the following devices:
• seca wireless printer
• PC with seca USB wireless adapter
The
seca 360° wireless
less groups. A wireless group is a virtual group of trans-
mitters and receivers. If you wish to operate several
transmitters and receivers of the same type, up to 3
wireless groups (0, 1, 2) can be set up.
Setting up several wireless groups ensures the reliable
transmission of measured values with the correct
address when using more than one examination room
each with similar equipment.
The maximum distance between transmitters and
receivers is approx. 10 metres. This range may be
reduced under certain local conditions, e.g. thickness
and type of wall partitions.
The following combination of devices is possible for
each wireless group:
• 1 baby scale
• 1 personal scale
• 1 length measuring rod
• 1 seca wireless printer
• 1 PC with seca USB wireless adapter
The seca 360° wireless network • 69
network operates with wire-
English