Attaching The Length Tape Measure; Operation; Weighing - Seca 757 Bedienungsanleitung Und Garantieerklärung

5.5 Attaching the length tape measure

6. OPERATION

6.1 Weighing

62 •
The scale is supplied with a length tape measure. To
affix it, proceed as outlined below.
1. Thoroughly clean and disinfect the tray (see
"Hygiene treatment" on page 75).
NOTE
The tray must be clean and dry before you affix
the length tape measure.
2. Peel the protective film off the rear of the length
tape measure.
3. Affix the length tape measure parallel to the top
edge of the tray on the retaining wall, as shown in
the adjacent illustration.
CAUTION!
Damage to persons
Perform a function check as described in the
section entitled "Function check" on page 76
before using the device each time.
WARNING!
Risk of falling
Baby scales generally stand on raised work sur-
faces. If the baby falls from this surface, this
may result in serious irreversible or fatal injuries.
– Ensure that the device is steady and level.
– Route connecting cables (if present) in such a
way that people cannot trip over them.
– Never leave a baby unsupervised.