Basic Mounting Of The Antenna - Megasat D1 Profi-Line Bedienungsanleitung

3. Mounting options

3.1 Basic mounting of the antenna

1
Attach the angle bracket to the back of
the antenna with four M6 x 10 moun-
ting screws.
3
Attach the angle bracket to the
mounting arm. To do this, insert a
fixing screw M6 x 15 through the
hole and fix it.
5
Insert an M6 x 55 fixing screw through
the hole of the angle bracket and se-
cure with an M6 nut on the opposite
side.
2
Screw the LNB fixation screw into the
LNB device. Then insert the LNB and
fasten it with the LNB clamping screw.
4
To fix, turn a M6 x 15 fixing screw into
the thread. This screw also adjusts the
horizontal angle (azimuth) of the antenna.
09