2. Installation
2.1 Connection of the Components
Maintain a careful installation of the cable in order to avoid short circuits.
Pay attention also to existing cables.
Connect the enclosed coaxial cable to the antenna
and your TV or set-top box.
2.2 Satellite search and TV reception
1. Once the antenna has been connected to the TV or receiver, turn it on to power the
antenna. An additional power source is not required.
2. Select any program (eg „The First" on Astra 19.2° East). Then the antenna starts sear-
ching for the satellite.
IMPORTANT NOTE:
Make sure that there is a satellite channel list (Astra 19.2° East) on your receiver (Tele-
vision or set-top box). Otherwise, the antenna search process will not be started!
3. After successful search, the selected program is displayed.
Note:
The antenna is programmed for the satellite Astra 19.2 ° East.
Another satellite can not be found!
04
All manuals and user guides at all-guides.com
DVB-S input
(Satellite input)
ENGLISH
Television