Inhaltsverzeichnis
Werbung
Installation
1.1.1.13
Caution!
The mains power supply must be disconnected
before installing the electronic potentiometer
2112U-101-500.
The maximum load of the electronic potentiometer 2112U-
101-500 in the control circuit must not exceed 50 mA.
When switching on the systems, inrush currents occur
which are higher and must be considered.
When connecting more than 6 electronic ballasts to
an electronic potentiometer 2112U-101-500, an
external contactor should be used. See figure 2.
Werbung
Inhaltsverzeichnis
