Introduction; Machine Identification; Inspection On Delivery; Safety Requirements - Mecc Alte ECP series Betriebs- Und Wartungsanleitung

The ECO-ECP alternators comply with the EEC 2006/42, 2006/95,
2004/108 directives and their amendments; therefore they pose no
danger to the operator if they are installed, used and maintained
according to the instructions given by Mecc Alte and provided the
safety devices are kept in perfect working conditions.
Therefore a strict observance of these instructions is required.
Any reproduction of this manual is forbidden.
Always indicate the generator type and code when contacting Mecc
Alte or the authorized after sales service centres.
When the alternator is delivered, check that unit conforms with the
delivery note and ensure that there are no damaged or defective
parts; should there be any, please inform the forwarding agent, the
insurance company, the seller or Mecc Alte immediately.
Before any cleaning, lubrication or maintenance operation, ensure that
the generator is stationary and disconnected from the power supply.
When stopping the generator, ensure the compliance with the proce-
dures for stopping the prime mover.
The generator, in fact, has no Emergency Stop, but is controlled by
the device arranged by the installer.
ECO - ECP MANUAL

INTRODUCTION

MACHINE IDENTIFICATION

INSPECTION ON DELIVERY

SAFETY REQUIREMENTS

3
ENGLISH
ECO-ECP iMANUAL December 2013 Rev. 03