Settings Menu; Parameters; Profile Memory; Date/Time - Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung

8.5 Settings menu

System info Information
Servicing
Settings
8. Control Unit

8.5.1 Parameters

Changes to default parameter settings (refer also to 3.3)
Note: Every change is immediately accepted when the OK key is pressed. In ad-
dition, when exiting this menu it is possible to save these values in the profile me-
mory under a separate name.
Parameter
8.5.2 Profile memory
Loading of the values accepted on initialisation and of the values added under a
Profile memory
new name (see 8.5.1).
Date / time
8.5.3 Date/time Setting the current date and time.
8.5.5 Type of system
Type of System
Selection of the separator size (NS).
Article Number
8.5.6 Article Number

8.5.7 Communication

Communication
Input / change of the station name, the device number, the modem type, the PINS
and the number of the mobile phone to which possible malfunctions can be sent

Language

by text message (for a detailed description see separate operating instructions).
External modus
8.5.8 Language Display / change of digital display language.

Reset

8.5.9 Expert mode access only by KESSEL Customer Service
8.5.10 Reset
SonicControl
model
Reset the switch unit to the default setting (operating hours are not reset).

8.5.11 SonicControl model

In this mode, SonicControl models from Model O to Model OA can be selected
61