Settings Menu - Kessel SonicControl Anleitung

8.5 Settings menu

Systeminfo Information
Servicing
Settings
8. Switch unit
8.5.1 Parameters
Changes to default parameter settings (refer also to 3.3)
Note: Every change is immediately accepted when the OK key is pressed. In ad-
dition, on quitting this menu it is possible to save these values in the profile me-
mory under a separate name.
Parameters
8.5.2 Profile memory
Loading of the values accepted on initialisation and of the values added under a
Profile memory
new name (see 8.5.1).
Date / time
8.5.3 Date/time Setting the current date and time.
8.5.4 Type of system
Type of System
Selection of the average grease content occurring and type of grease.
Type of
grease separator 8.5.5 Type of grease separator Selection of the type of grease separator.
Language
8.5.6 Language Display / change the language.
8.5.7 Communication
Communication
Input / change of the station name, the device number, the modem type, the
Sensors
PINS and the number of the mobile phone to which possible malfunctions can be
sent by text message (for a detailed description see separate operating instruc-
Reset
tions).
8.5.8 Sensors Sensor address assignment.
8.5.9 Reset
Reset the switch unit to the default setting (operating hours are not reset).
65