Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung Seite 39

2. General
Dear customer,
we are pleased that you have decided to buy a KESSEL product.
The entire system was subjected to a stringent quality control before it left our factory. Nevertheless, please check immediately whether
the system has been delivered to you complete and undamaged. In case of any transport damage, please refer to the instructions in the
chapter "Warranty" in this manual.
These installation, operating and maintenance instructions contain important information that has to be observed during assembly, ope-
ration, maintenance and repair. Prior to carrying out any work on the system, the operator and the responsible technical personnel must
carefully read and heed these installation and operating instructions.
The SonicControl measuring device for oil and coalescence separators monitors accurately (to the centimetre) the current layer thickness
SonicControl for oil and coalescence separators:
of collected oil / fuel on the surface of the separator as well as sludge at the base of the separator and also warns when back-ups occur
into the separator.
The UltraSonic sensor is a compact system for installation in EX-Zone 0 rated areas inside oil and coalescence separators.
Proper Operation:
This system is appropriate for explosion rated areas listed as Ex-Zone 0.
The system is designed to monitor the following:
O = oil / fuel layer thickness
S = sludge layer thickness
A = Back-up warning
SonicControl is an automatic operated warning system which according to DIN EN 858-1 is recommended for use with oil and coalescence
separators.
The following 3 models are available: 1. OA, 2. O, 3. A
39