Settings Menu; Parameters; Profile Memory; Date/Time - Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung

8.5 Settings menu

Systeminfo
Information
Servicing
Settings
8. Switch unit

8.5.1 Parameters

Changes to default parameter settings (refer also to 3.3)
Note: Every change is immediately accepted when the OK key is pressed. In ad-
dition, on quitting this menu it is possible to save these values in the profile me-
mory under a separate name.
Parameters
8.5.2 Profile memory
Loading of the values accepted on initialisation and of the values added under a
Profile memory
new name (see 8.5.1).
Date / time
8.5.3 Date/time Setting the current date and time.

8.5.4 Type of system

Type of System
Selection of the average grease content occurring and type of grease.
Type of
grease separator 8.5.5 Type of grease separator Selection of the type of grease separator.

Language

8.5.6 Language Display / change the language.

8.5.7 Communication

Communication
Input / change of the station name, the device number, the modem type, the

Sensors

PINS and the number of the mobile phone to which possible malfunctions can be
sent by text message (for a detailed description see separate operating instruc-

Reset

tions).
8.5.8 Sensors Sensor address assignment.
8.5.9 Reset
Reset the switch unit to the default setting (operating hours are not reset).
65