Safety Instructions - Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung

Dear customer,
Before you put your KESSEL SonicControl
into operation, please read through the in-
stallation instructions carefully and follow
them.
Check first whether the system has arrived
undamaged. In case of any transport dama-
ge, please refer to the instructions in chapter
12 "Warranty".

1. Safety instructions:

During installation, operation, maintenance
or repair of the system, the regulations for
the prevention of accidents, the pertinent
DIN and VDE standards and directives, as
well as the directives of the local power sup-
ply industry must be heeded.
Installation, Operation and Service of the
SonicControl may only handled by a profes-
sional licensed service company. The So-
nicControl may not be repaired , changed or
manipulated. In the case of a product defect,
the entire SonicControl system should be
replaced
1. Safety Instructions
Before putting the device into operation,
make sure through professional examinati-
on that the necessary protective features are
available. Grounding, neutral, residual cur-
rent-operated protective circuit etc. must
correspond to the requirements of the local
power supply industry.
The system operates on electrical current.
Noncompliance with the operating instruc-
tions may result in considerable damage to
property, personal injuries or even fatal ac-
cidents.
The system must be disconnected
from the mains before any work is
carried out on it!
Beware of all operations on the ves-
sel or to the sensor housing. Risk of
electrostatic charging due to friction
and flow of fluids! Electrostatics is a potential
source of ignition of flammable materials or
gases. Sensor housing and cables Clean
with damp cloth.
It must be ensured that the electric cables
as well as all other electrical system equip-
ment
are in a faultless condition. In case of dama-
ge, the system may on no account be put
into operation or must be stopped immedia-
tely.
The system must be inspected and serviced
regularly to maintain its operational ability.
We recommend that you conclude a servi-
cing contract with your installation company.
We recommend that the system is checked
on a weekly basis for proper operation.
The installation of the ultrasonic sensor insi-
de the separation tank may only take place
when the separator contains no dangerous
wastewater, gases or fumes.
38