Setup And Use Of The Combi Heater; Assembly Of Parts; Ball Valve - Sawotec NORDEX COMBI NEXT Bedienungsanleitung

SETup ANd uSE of THE CoMbI HEATER

ASSEMbLy of pARTS

ball valve

Before installing the ball valve wrap Teflon tape around the nipple's thread to ensure
water proof insulation. When attaching and detaching the ball valve make sure that the
valve's handle is in closed position.
Abb 2
Hitzeschild
Fig. 2
Reflector
Vergewissern Sie sich, dass das
Hitzeschild auf der Rückseite des
Ofenrahmens eingerastet ist.
wICHTIG!
Der Reflektor muss installiert
werden, um Brandgefahr zu
vermeiden.
Make sure that the heat reflector
shield is placed at the back
part of the heater frame.
Schrauben
Screw
Rahmen
Frame
NoTE!
Reflector must be installed to
prevent risk of fire.
Hitzeschild
Reflector
DEUTSCH | ENGLISH
9