Introduction Of The Combi Heater; Setup And Use Of The Combi Heater; Assembly Of Parts; Ball Valve - Sawotec SAVONIA COMBI Bedienungsanleitung

INTRoduCTIoN of THE CombI HEATER

• A combination of a heater and steamer with Scent Basins and probably the most
reliable steamer due to its patented Water Level Detection System.
• Allows users to choose from normal sauna to steam bathing.
• Its metal parts and Water Tank are made of stainless steel and the unique design of
the heating elements makes the Water Tank easy to keep clean.
• Operated with an external control unit.
• Its optional fiber-coated casing makes it safer and cool to touch.
• Savonia Combi as available in 9.0kW, 10.5kW and 12.0kW, Manual Refill or with Built-
in Automatic Refill System.
• The Super Savonia Combi has two tanks located on both sides of the heater giving
more steam to the bather.
• Available in 15.0kW and 18.0kW, Manual Refill or with Built-in Automatic Refill Sys-
tem.

SETup ANd uSE of THE CombI HEATER

ASSEmbLy of pARTS

ball valve

Before installing the ball valve wrap Teflon tape around the nipple's thread to ensure
water proof insulation. When attaching and detaching the ball valve make sure that the
valve's handle is in closed position.
Abb 2 Kugelhahn
Fig. 2 Ball valve
Kugelhahn in der Schließstellung beim Savonia Combi
Ball Valve in "close" position of Savonia Combi
Vom Überlaufloch des Tanks
From overflow hole of the tank
Abflussrohr
Drainage Pipe
Ablassventil
Drain Valve
Wasserzulauf
Water Inlet
Kugelhahn in Position "offen"
Ball Valve in "open" position
Kugelhahn in der Schließstellung beim Super Savonia Combi
Ball Valve in "close" position of Super Savonia Combi
Ablassventil
Wasserzulauf
Drain Valve
Water Inlet
Vom Überlaufloch
des Tanks
From overflow
hole of the tank
Verbindungsschlauch
Connecting Hose
DEUTSCH | ENGLISH
9