Introduction - PowerWalker VI 1000 ERT HID Bedienungsanleitung

1. Introduction

This line-interactive series is compact and pure sine wave UPS and it is
designed for essential applications and environment, such as desktops,
servers, workstations, and other networking equipments. These models are
available in the output ratings of 1000VA/1500VA/2000VA/3000VA. The
series protects your sensitive electronic equipments against power problems
including power sags, spike, brownouts, line noise, under voltage, over
voltage and blackouts.
The series is convertible to rack and tower forms. It can be placed either in
Rack 2U or Tower form. The front panel of the UPS includes LCD display and
four control buttons that allow users to monitor, configure and control the units.
On LCD, it also includes a LCD graphical bar, two status indications and four
alarm indications. A control button from the front panel allows users to silence
off the AC fail alarm and initiate the UPS self test sequence as well. The UPS
case for 1000VA/1500VA/2000VA/3000VA is made of metal. This series is
powered from the AC mains and supply AC outputs via receptacles on the
rear panel. Communication and control of UPS is available through serial or
USB ports located on the rear panel. The serial port will support
communications directly with a server and offer dry-contacts.
Features:
 Microprocessor control guarantees high reliability
 High frequency design
 Built-in boost and buck AVR
 Easy battery replacement design
 Selectable input and output range
 Cold start capability
 Built-in Dry contact/RS-232/USB communication port
 Optional SNMP module allows web-based remote or monitoring
management
 Enable to extend runtime with scalable external battery module(EBM)
 Overload, short-circuit, and overheat protection
 Rack/Tower 2-in-1 Design
 19 inches rack mount available for all models
4
EN