PowerWalker VI 1000 ERT HID Bedienungsanleitung Seite 13

4. Take off the front panel, and connect the battery terminal (A) from UPS
to EBM terminal (B) shown as below. Users need to remove the small
gate(C) on side of the front panel to allow the outlet wire of the EBM to
pass through the gate and then reassemble front panel.
 Connecting the EBM in a rack form
1. Using the same method as assembling UPS in a rack form, assemble
EBM into the rack-mounting on the top or bottom of the UPS.
A
C
B
12
EN