Installation; Inspection Of Unit; Unpacking The Cabinet; Ups Setup - PowerWalker VI 1000 ERT HID Bedienungsanleitung

3. Installation

3.1 Inspection of Unit

Inspect the UPS upon receiving. If the UPS is apparently damaged during
the shipment, please keep the box and packing material in original form for
the carrier and notify the carrier and dealer immediately.

3.2 Unpacking the Cabinet

To unpack the system:
1. Open the outer carton and remove the accessories packaged with the
cabinet.
2. Carefully lift the cabinet out of the outer carton and set it on a flat, stable
surface.
3. Discard or recycle the packaging in a responsible manner, or store it for
future use.
Package content: UPS, Input Power Cord, 2x IEC cable, Tower Holder,
Rack Ears, EPO Plug, USB cable, Software CD, manual

3.3 UPS Setup

All model series are designed for tower and rack purpose. They can be
installed into a 19 inches equipment rack. Please follow the instruction for
Tower Setup and Rack-Mount Setup.
 Tower setup
This series of UPS can be placed horizontally and vertically. As a tower
configuration, it is provided with the optional UPS stands to stabilize the
UPS when the UPS is positioned in vertical. The UPS stand must be
attached to the bottom of the tower.
6
EN