Configuring Ups For Ebm Numbers; Configuring Green Function - PowerWalker VI 1000 ERT HID Bedienungsanleitung

5. Confirm settings: Press and hold the Enter button
ups will return to current setting item.
6. Exit Settings mode: Press and hold the Enter button
button
EN

4.4 Configuring UPS for EBM Numbers

To ensure the LCD displays the correct battery volume, configure the UPS for
the correct number of EBMs:
Note: 1 KVA E-model has no EBM,can not configure.
1. Enter settings mode: Press
mode.
2. Select settings items: Press
3. Enter settings item: Press
item.
4. Select setting value: Press the Select button
EBM according to your UPS configuration.
5. Confirm settings: Press and hold the Enter button
will return to current setting item.
6. Exit Settings mode: Press and hold the Enter button
button

4.5 Configuring Green Function

Green Function is that when an insignificant amount of load is detected, the
UPS will shut down output automatically on battery mode.
The green function is disabled on default mode and user can configure Green
Function through the display:
1. Enter settings mode: Press
mode.
2. Select settings items: Press
3. Enter settings item: Press
item.
4. Select setting value: Press the Select button
5. Confirm settings: Press and hold the Enter button
ups will return to current setting item.
6. Exit Settings mode: Press and hold the Enter button
button
for 0.5 second to exit setting mode.
for 0.5 second to exit setting mode.
for 0.5 second to exit setting mode.
more than 3 seconds to enter setting
to select setting items as "EbM".
more than one second to enter the setting
more than 3 seconds to enter setting
to select setting items as "GF".
more than one second to enter the setting
23
second,
for one
for 3 seconds or
to select the number of
second, ups
one
for 3 seconds or
to select "001".
for one second,
for 3 seconds or