Introduction; General Introduction; Panel Introduction - PowerWalker DC UVS Bedienungsanleitung

1. Introduction

1.1 General Introduction

DC UPS is the innovative power protection solution for delicate network devices
and telecom equipments. It equips with 12V/30Watts power capacity and internal
long 7 amp-hour backup battery. With universal input voltage design, this UPS
can be widely applied to the majority power system without AC input voltage
transfer. The advantages of DC output are saving the cost and space of the
additional power adapter connection. This feature further prevents the power loss
while transferring between DC to AC. The thoughtful wall-mount design allows
you to install DC UPS to diverse environments for maximizing your precious
space. DC UPS can be applied to any other device equipped with a compatible
DC input connector.
Features
Universal input range (80-260VAC) for global applications

12VDC (30W max.) output meets the major standard of network devices

Integrated hot-swappable to easy replacement battery allows battery

replacement without power interruption.
Microprocessor controlled for optimized operation and maximum reliability

Audible warning alarm with mute switch

Outputs for remote monitoring; On Battery, Replace Battery, Battery

missing and
Low battery alert

Wall mountable design for maximized flexibility

Multiple LED for AC power and battery status indications

Cold Start function capable


1.2 Panel Introduction

The front view

Use power on/o ff switch to turn the
DC UPS on/o ff. The unit will not
supply power to the networkdevices
when power switch is in OFF (Not
push down)position.
Pow er on/off
Mute on/off
Use this switch to turn the mute function
on/o ff. Theaudible alarmswillbe silenced
when mute switch is in ON (Push down)
position.
Status Indicators
There are three LED status lights: red,
yellow and green which are from left to
right. The status lights indicate specific
conditions of the DC UPS. (See page X.)
EN
Page 3