Making Hot Water - Rommelsbacher EKS 1510 Bedienungsanleitung

Step 16:
If the appliance is not needed any
more, switch it off and pull the
mains plug.

Making hot water

• With this appliance, hot water for tea etc. can be made.
• Water out of the hot water/steam nozzle has a temperature of ca. 85 °C.
• Attention: Make sure that the holes in the nozzle are always clean and not clogged.
• Attention: For moving the nozzle, only touch it at the upper plastic part.
Warning: Casing, brew head,
portafilter, filter inserts and hot
water/steam nozzle are getting hot
during use!
Step 4:
Choose the function
"espresso/hot water".
Please refer to
"Cleaning and maintenance"
for further information.
Step 17:
Clean the appliance and the
accessories.
• Check the water tank
regularly, refill water if
necessary.
• Check the drip pan
regularly, empty it if
necessary.
Step 1:
Prepare the appliance.
Step 5:
Switch the appliance on.
The appliance heats up and the
temperature pilot lamp glows red
permanently.
When the lamp exinguishes, the
appliance is ready for use. The
operation pilot lamp glows blue
permanently.
Step 2:
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 6:
Start hot water supply.
Turn the rotary knob to the right.
Dispense the desired quantity of
hot water.
Step 3:
Place a vessel below the outlet of
hot water/steam nozzle.
Step 7:
Stop hot water supply.
Turn the rotary knob to the top. The
appliance is ready for use.
NOTE: The appliance carries excess
water back into the water tank via a
recirculation system!
37