Making Espresso/Coffee - Rommelsbacher EKS 1510 Bedienungsanleitung

Step 8: (bleeding)
Start hot water supply.
Turn the rotary knob to the right.
Dispense hot water until it comes
without air. Use the water for
warming the cups.

Making espresso/coffee

• For a perfect result, we recommend ...
... initial use without filter insert and powder for preheating the system (see steps 4a - 4d)
... preheating the cups
... using fresh tap water
... using freshly ground powder
... exchange water in the tank regularly.
Warning: Casing, brew head,
portafilter, filter inserts and hot
water/steam nozzle are getting hot
during use!
Preheating the system:
Step 4a: (preheating the system)
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 9: (bleeding)
Stop hot water supply.
Turn the rotary knob to the top.
NOTE: The appliance carries excess
water back into the water tank via a
recirculation system!
• Check the water tank
regularly, refill water if
necessary.
• Check the drip pan
regularly, empty it if
necessary.
Step 1:
Prepare the appliance.
Step 4b: (preheating the system)
Place a vessel below the outlet of
the portafilter.
Step 2:
Choose the function
"espresso/hot water".
Step 4c: (preheating the system)
Start water supply. Turn the rotary
knob to the left. Dispense hot water
for 10 seconds.
Step 3:
Switch the appliance on.
The appliance heats up and the
temperature pilot lamp glows red
permanently.
When the lamp exinguishes, the
appliance is ready for use. The
operation pilot lamp glows blue
permanently.
Step 4d: (preheating the system)
Stop water supply. Turn the rotary
knob to the top.
33